The mattress utilizes 18 independent 5.5″ deep air cells to reduce interface pressure for the prevention and treatment of Stages I-IV pressure ulcers. User friendly controls and ease of setup make these systems ideal for institutional use and the homebound patient. The Rapid-Air™ and Rapid-Air™ Plus Alternating Pressure Mattress Systems with Gentle Low Air Loss is designed to fit all standard hospital beds.
Bladders:Ventilated bladders include 20 lasered air holes in sacral area to help reduce skin maceration by reducing excess moisture under patient. Ventilated bladders help in the treatment and prevention of pressure ulcers. Air cells are constructed of TPU, thermal polyurethane fabrics. This combination insures strength, durability and patient comfort.The model 4300P Rapid-Air Plus™ features a PPF™ 2.5” pressure redistribution foam base that protects the patient from bottoming out during power outages. The foam is covered in a medical grade nylon which is anti-microbial and fire retardant.
Cover:Vyvex-I™ nylon cover wicks moisture away from patients skin. The cover is low shear, anti-microbial, fluid resistant, fire retardant and washable. Cover is loose fitting and will conform to the patient. *shown with optional SRS – Side Rail System
CPR Valve quickly deflates mattress system for medical emergencies.
Pump:Alternating mode offers the therapeutic benefit of alternating therapy and reactive hyperemia. This helps to reduce interface pressure well below 32mmHg.Control dial adjusts mattress from soft to firm for patient comfort.Normal Pressure Alert indicates that system isoperating correctly.Low Pressure Alert indicates that output needs to be increased for heavier patients or accidental disconnection of hoses.
Optional blower pump is available to quickly inflate and deflate mattress through CPR valve in under 4 minutes
MODEL 4300
Rapid-Air™ - Alternating Pressure Mattress only
Dimensions:
35″ x 80″ x 5.5″
Weight:
20 lbs.
Air Cells:
18 – 5.5 ” sacs15 Alternating pressure cells10 Ventilated cells with 20 lasered air holes3 Static cells in head section
Mattress Cover:
Vyvex-1™ - Low shear, moisture/vapor permeable. Removable zippered cover,is anti-microbial and meets California Technical Bulletin #117 for fire-retardancy.
Rapid-Air™ Plus – Alternating Pressure Mattress only
35″ x 80″ x 8″ (Including foam base)
18 – 5.5″ sacs15 Alternating cells10 Ventilated cells with 20 lasered air holes3 Static cells in head section
Vyvex-1® – Low shear, moisture/vapor permeable. Removable zippered cover,is anti-microbial and meets California TechnicalBulletin #117 for fire-retardancy.
MODEL 4301
Rapid-Air™ - Pump only
10″L x 5″W x 4.5″H
6.2 lbs.
Electrical:
120V 60 hz
Listings:
UL® 544 Medical Equipment
Cycle Time:
10 Minutes
Air Flow:
7.5 Liters per minute
Current Usage:
less than 100 micro amps
Ground Resistance:
0.1 ohms maximum
Power Cord:
12 ft. cord
Construction:
ABS fire retartdant UL 94V-0
WARRANTY
Pumps:
1 Year limited
Mattress:
Cover:
6 months limited
ORDERING INFORMATION
Model 4300PLUS
Mattress and Pump Control unit 35″ x 80″ x 5.5″ (including foam base)
Model 4300
Mattress and Pump Control unit 35″ x 80″ x 5.5″
Model 4300SRS
Mattress with Safety Rail System
Model 4300PM
Pediatric Mattress 25″ x 45″ x 3.5″
Model 4301
Alternating Pressure Pump Control Unit
Model 4320
Mattress only
Model 4322
Carry Bag with Strap
Model 9623
Electric Inflator & Deflator
Model 4324
Replacement 5.5″ Ventilated Bladders
Model 4325
Replacement 5.5″ Cell Bladders
Model 4326
Replacement Zippered Cover
Replacement SRS Safety Rail System cover for patient safety
PDAC APPROVED
Medicare Code EO277
[ITEMPRICE]