Rapid-Air™ Alternating Pressure Mattress with Gentle Low Air Loss

The mattress utilizes 18 independent 5.5″ deep air cells to reduce interface pressure for the prevention and treatment of Stages I-IV pressure ulcers. User friendly controls and ease of setup make these systems ideal for institutional use and the homebound patient. The Rapid-Air™ and Rapid-Air™ Plus Alternating Pressure Mattress Systems with Gentle Low Air Loss is designed to fit all standard hospital beds.

Bladders:
Ventilated bladders include 20 lasered air holes in sacral area to help reduce skin maceration by reducing excess moisture under patient. Ventilated bladders help in the treatment and prevention of pressure ulcers. Air cells are constructed of TPU, thermal polyurethane fabrics. This combination insures strength, durability and patient comfort.The model 4300P Rapid-Air Plus™ features a PPF™ 2.5” pressure redistribution foam base that protects the patient from bottoming out during power outages. The foam is covered in a medical grade nylon which is anti-microbial and fire retardant.

Cover:
Vyvex-I™ nylon cover wicks moisture away from patients skin. The cover is low shear, anti-microbial, fluid resistant, fire retardant and washable. Cover is loose fitting and will conform to the patient. *shown with optional SRS – Side Rail System

CPR Valve quickly deflates mattress system for medical emergencies.

Pump:
Alternating mode offers the therapeutic benefit of alternating therapy and reactive hyperemia. This helps to reduce interface pressure well below 32mmHg.Control dial adjusts mattress from soft to firm for patient comfort.Normal Pressure Alert indicates that system is
operating correctly.Low Pressure Alert indicates that output needs to be increased for heavier patients or accidental disconnection of hoses.

Optional blower pump is available to quickly inflate and deflate mattress through CPR valve in under 4 minutes

MODEL 4300

Rapid-Air™ - Alternating Pressure Mattress only

Dimensions:

35″ x 80″ x 5.5″

Weight:

20 lbs.

Air Cells:

18 – 5.5 ” sacs
15 Alternating pressure cells
10 Ventilated cells with 20 lasered air holes
3 Static cells in head section

Mattress Cover:

Vyvex-1™ - Low shear, moisture/vapor permeable. Removable zippered cover,
is anti-microbial and meets California Technical Bulletin #117 for fire-retardancy.

MODEL 4300

Rapid-Air™ Plus – Alternating Pressure Mattress only

Dimensions:

35″ x 80″ x 8″ (Including foam base)

Weight:

20 lbs.

Air Cells:

18 – 5.5″ sacs
15 Alternating cells
10 Ventilated cells with 20 lasered air holes
3 Static cells in head section

Mattress Cover:

Vyvex-1® – Low shear, moisture/vapor permeable. Removable zippered cover,
is anti-microbial and meets California Technical
Bulletin #117 for fire-retardancy.

MODEL 4301

Rapid-Air™ - Pump only

Dimensions:

10″L x 5″W x 4.5″H

Weight:

6.2 lbs.

Electrical:

120V 60 hz

Listings:

UL® 544 Medical Equipment

Cycle Time:

10 Minutes

Air Flow:

7.5 Liters per minute

Current Usage:

less than 100 micro amps

Ground Resistance:

0.1 ohms maximum

Power Cord:

12 ft. cord

Construction:

ABS fire retartdant UL 94V-0

WARRANTY

Pumps:

1 Year limited

Mattress:

1 Year limited

Cover:

6 months limited

ORDERING INFORMATION

Model 4300PLUS

Mattress and Pump Control unit 35″ x 80″ x 5.5″ (including foam base)

Model 4300

Mattress and Pump Control unit 35″ x 80″ x 5.5″

Model 4300SRS

Mattress with Safety Rail System

Model 4300PM

Pediatric Mattress 25″ x 45″ x 3.5″

Model 4301

Alternating Pressure Pump Control Unit

Model 4320

Mattress only

Model 4322

Carry Bag with Strap

Model 9623

Electric Inflator & Deflator

Model 4324

Replacement 5.5″ Ventilated Bladders

Model 4325

Replacement 5.5″ Cell Bladders

Model 4326

Replacement Zippered Cover

Model 4326

Replacement SRS Safety Rail System cover for patient safety

PDAC APPROVED

Medicare Code EO277