Jazzy 600 ES

The Jazzy® 600 ES provides excellent performance and outstanding stability. Its compact design and standard Active-Trac® ATX Suspension allow it to excel indoors and out, making it a superb, all-around power chair choice.

Features and Benefits
Side-mounted, easily accessible freewheel levers	Active-Trac® ATX Suspension for enhanced performance over more varied terrain
Easy front access to batteries	OMNI-Casters (nylon, spherical-shaped casters) on front and rear to prevent wheel hang-ups

Specifications
Model	Jazzy 600 ES
Weight Capacity	300 lbs.
Turning Radius	20.5"
Width	24.5"
Length	35.5"
Maximum Speed	Up to 4 mph
Ground Clearance	2.75"
Front Wheels	6" solid OMNI-Casters
Drive Wheels	14"
Rear Wheels	6" solid OMNI-Casters
Drivetrain	Two-motor, mid-wheel drive
Braking System	Regenerative and electro-mechanical
Suspension Type	Active-Trac® (ATX)
High-Back Seat (max. size)	20"W x 20"D
High-Back Seat-to-Floor Range	21" - 24"
Specialty Seating (max. size)		20"W x 20"D
Specialty Seat-to-Floor Range		17" - 20"
Synergy® Seating	20"W x 20"D
Synergy® Seat-to-Floor Range	17.25" - 19.25"
Standard Electronics	50A, Dynamic Shark
Battery Size (2 required)	12 volt, NF-22
Standard Battery Charger	5A, off-board
Per-Charge Range	Up to 16.65 miles
Battery Weight	37 lbs. each
Weight of Heaviest Piece5	123.6 lbs.
Standard Seat Weight	51.5 lbs. (high-back)
Standard Seat Size	18" x 18"-20" / 20" x 18"-20"
Medicare Code Coverage	Group 2: Standard (K0822/K0823)
Warranty	Lifetime limited warranty on frame;; 13-month limited warranty on electronics; 13-month limited warranty on drive motors

Notes: Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of + or - 3 %. Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections. Without front riggings. Varies with user weight, terrain, battery type, battery condition and tire pressure. Does not include seat or battery weights. Battery weight may vary based on manufacturer. Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4 and ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Testing conducted at maximum weight capacities. This specification can be subject to a variance of +10%, -5%.